Dry clean the 100% silk fabric for tie, you can take a cotton pad dipped in a little alcohol or gasoline, gently wipe, can remove stains, and then pad a piece of wet white cloth, ironing with iron. The temperature at the time of ironing is determined by the material used for the tie. Chemical fiber fabric ironing temperature can not be too high (70 ℃ below); the temperature of the silk can be higher (170 ℃ below).
Scrub the tie, you can use plastic sheet or thin plywood according to the size of the tie to do a model, the tie set in the model above, with a soft brush dipped in detergent on the silk jacquard woven tie gently scrub. And then wipe clean with water (be sure to clear). After washing for a while, you can lined with a piece of white wet cloth with iron ironing. Then you can remove the model. So, the tie will not be deformed, and smooth as new.
Wash the tie with water, you can put the neck into the warmth of about 30 ℃ soak for 1-3 minutes, with a brush gently along the tie pattern brushing, no hard brush, can not be any rub, brush to use With the same temperature of water and water rinse clean. And then press the law for ironing. If the wash after the tie in case of the shape, the tie can be removed behind the suture, the tie fabric and lining cloth ironing rough, and then sew as well can be.
Blended and synthetic fiber ties that can be washed. But before washing should be placed in the same layer of the same shape of the cardboard, and then sprayed with water, with a brush dipped in detergent gently brush to dirt, and then scrub with water. Before drying, first with a dry cloth pressure on the tie to absorb water, and then dry in a cool and ventilated place, after drying, the tie within the cardboard can be removed.
Silk tie can not be washed. Can be used to drop the volatile oil in the empty bottle, and then into the tie, and then tighten the cap, every one will shake the bottle, about twenty or thirty minutes later, remove the tie can be clean as new.

没有评论:
发表评论