Men wear dress when the general should play the Print Cotton Necktie, this time the men must pay attention to the tie color, different colors represent different attempts, different temperament. In the match must understand what color on behalf of what, so as not to come up with oolong Oh.
Before looking at the tie color, we first look at the different patterns of the tie represents a different meaning: First, twill on behalf of brave. Second, the grid on behalf of enthusiasm. Third, flies on behalf of considerate. Fourth, the vertical line on behalf of comfort. Five, horizontal line appears smooth. Six, wavy lines on behalf of lively, jumping. Seven, round on behalf of full maturity.

The quality of the wholesale silk ties quality, fundamentally speaking, does not depend on the style and brand, the surface depends on the material texture and work of the elegant. There are three methods of material identification:
First, identify the relevant material signs
100% SILK 100%; Silk 100% SILK 100%; Silk 100% POLYESTERI00%; Polyester 100% DACRON.
Second, the difference between visual and feel
Silk color moist, soft, feel fine; imitation silk: shiny shiny, diving, feel quite scraping silk color quite darker, feel rough.
Third, the difference between the thickness of the material
Silk to 14-16 m is better; imitation silk, polyester to feel appropriate is appropriate. Work to identify five points:
1, the standard tie is made of three sections from the total length of 145CM, angle of 45 degrees.
2, smooth surface, flower pattern clear, symmetrical.
3, the back of the vertical seam center.
4, the degree of consistency of the pattern at the splice.
5, the entire short band fabric color consistency or not.

While wearing a suit, the outside world with a tie that is better, but how to maintain the tie it?

A good end of the Polyester Knitted Tie, it is best not to ironing and washing, if this will only be destroyed. The tip of the tie with a hot iron out of sharp sharp corners, looks will make people feel very strange. You can put the tie rolled up on the night, the next day will be flat. You can also put a steam in the bathroom for a while, folds will disappear. Wash the tie will leave ugly water stains, tie the lining will be wrinkled. It is recommended in a professional dry cleaners to maintain their beloved tie, or let you lucky to have the skills to tie the other half to help you take care of.
The proper way to store the silk knit neckties should be flat, not hang. Can be rolled up one by one, can also be placed flat in a large drawer inside. Long hanging on the tie frame, or long hanging inside the suit, there will be bars and collar hook out of the wrinkles, this suspension is very common, but the effect is not good.
Do not look like a very small accessories, but want to achieve a very good effect, or to be very good to maintenance, so that we can wear the effect of wear.

As the tie fabric and lining materials are different, washed easily after the wrinkle, but also easy to damage the pattern for necktie surface gloss, must not put the whole strip into the water washing, the best use of dry cleaning. The following provides some way to wash the tie, may wish to try.
1, when washing with a tie
You can put the collar first into the temperature of about 30 ℃ soaking soap for 1-3 minutes, with a brush gently along the tie pattern brushing, no hard brush hard, can not be any rubbing, cleaning finished with 30 ℃ water rinse clean. And then press the method for ironing. If the washed necklace in the case of the shape, the tie can be behind the suture apart, the tie fabric and lining cloth ironing flat, and then sew as it is.
2, dry cleaning Mens Cotton Printed Tie
Take a cotton pad dipped in a little alcohol or gasoline, gently wipe, remove the stains, and then pad a piece of wet white cloth, ironing with iron. The temperature at the time of ironing is determined by the material used for the tie. Chemical fiber fabric ironing temperature can not be too high (70 ℃ below); the temperature of the silk can be higher (170 ℃ below).
3, when washing the tie
You can use a sheet of paper or a thin plywood to make a model of the size of the tie, set the tie on the top of the model, brush it with a soft brush and dip it on the neck. And then wipe clean with water (be sure to clear). After washing for a while, you can lined with a piece of white wet cloth with iron ironing. Then you can remove the model. So, the tie will not be deformed, and smooth as new.

As the tie fabric and lining materials are different, washed easily after the wrinkle, but also easy to damage the Polyester Woven Tie surface gloss, must not put the whole strip into the water washing, the best use of dry cleaning. Mens Cotton Printed Tie knot the place easy to stain dirt, can be placed in the bowl containing gasoline with hand rubbing or scrubbing. Other dirt place, scrub with a cloth dipped in gasoline can be.

How to maintain a custom suit tie

Customize the length of the suit italian silk necktie is very important, the tie is too long or too short, always indecent, the appropriate tie length for the tie's tip just touch the belt buckle, but also based on height and tie the way to adjust. Tie as a custom suit accessories, should also be the same as custom suits, carefully conservation and preservation. So how do we keep the tie for custom suits?
1, after the tie, please immediately untie the bow tie, and gently untied from the collar, due to pull the table cloth and lining, the fiber easily broken, resulting in permanent wrinkles.
2, the tie every time wear, knot mouth untied, the tie folded or tied with a tie shelf, and pay attention to whether the placement is smooth, so as not to scratch the tie.
3, driving seat belts, do not put the tie in the seat belt, so as to avoid wrinkles.
4, after wearing a tie once, please wear a few days later, and the tie placed in a wet place or spray a little water, so that the fold to restore the original state, and then received a dry place flat or hanging.
5, tie stained dirt, dry cleaning immediately.
6, handle tie knot wrinkles, please use the steam iron low temperature ironing, washing and high temperature ironing, deformation caused by deformation and damage.